home facebook twitter instagram youtube

COBB Custom Features: Using Launch Control on Mazda Vehicles

Follow

Applicable Model/Year: 

  • Mazdaspeed 3 2007-2013
  • Mazda3 MPS 2007-2013
  • Atenza 2007-2013
  • Axela 2007-2013
  • Mazdaspeed 6 2007-2013
  • Mazda 6 MPS 2007-2013

 

 

How To Enable:

Version 2 Accessport

  1. Launch Control must be enabled through either Accesstuner or Accesstuner Pro software.

 

Version 3 Accessport.

  1. With the Accessport hooked up to your vehicle
  2. Select Tune menu
  3. Go to Settings
  4. Enable launch control in the settings menu.
  5. Select Change Map
  6. After choosing a map which has launch control enabled you will be asked what RPM to launch at.
  7. After that follow the rest of the normal map change process.
  8. You're Done!

 

 

Steps to Use:

  1. Bring vehicle to a complete stop
  2. Fully depress the clutch pedal.
  3. Put the transmission in 1st gear.
  4. Press the accelerator pedal to the floor quickly, vehicle will now hold at the specified fuel cut level. (Base RPM Setting: Focus 2500rpm, Mustang )
  5. Release the clutch.

 

Available Adjustments and How to Make them:

Version 2 Accessport

  1. All adjustments must be made through the Accesstuner or Accesstuner Pro software.

 

Version 3 Accessport

  1. Select Tune menu on Accessport
  2. Select Change Map
  3. After choosing your map you will be asked what RPM to launch at.
  4. After that follow the rest of the normal map change process.

 

 

Things To Look Out For:

WARNING - USE OF THIS SYSTEM IS VERY ABUSIVE AND WEARING ON THE VEHICLES ENGINE, CLUTCH, TRANSMISSION, AXLES, DIFFERENTIAL AND TIRES.  THE USER ACCEPTS ALL RISK AND RESPONSIBILITIES WHEN USING THIS FEATURE. 

 

Have more questions? Submit a request

Comments

Powered by Zendesk