Final Mishimoto Intake OTS maps for Accessport for 2015/2016/2017 WRX
In response to heavy demand from customers, we now have new Mishimoto Intake maps for the 2015/16/17 WRX 6MT available for you guys to test out!
The USDM 2015 WRX 6MT maps are available for download here: https://cobb.box.com/2015-WRX-Mishimoto-Intake
The USDM 2016 WRX 6MT maps are available for download here: https://cobb.box.com/2016-WRX-Mishimoto-Intake
The USDM 2017 WRX 6MT maps are available for download here:https://cobb.app.box.com/v/2017-WRX-Mishimoto-Intake
The USDM 2015 WRX CVT maps are available for download here (Stage 1 Only): https://cobb.box.com/2015-WRX-CVT-Mishimoto-Intake
The USDM 2016 WRX CVT maps are available for download here (Stage 1 Only): https://cobb.box.com/2016-WRX-
The USDM 2017 WRX CVT maps are available for download here (Stage 1 Only): https://cobb.app.box.com/v/2017-WRX-CVT-Mishimoto-Intake
The ADM 2015 WRX 6MT maps are available for download here: https://cobb.box.com/2015-ADM-WRX-MISHIMOTO
The ADM 2016 WRX 6MT maps are available for download here: https://cobb.box.com/2016-ADM-WRX-MISHIMOTO
The hardware requirements for these maps are as follows:
- Mishimoto Intake with Airbox
- Mishimoto Intake with Airbox
- Upgraded Catted J-Pipe
- Upgraded Catback Exhaust (Stock Catback Acceptable)
- Deleted 2nd Restrictor Pill (Between Tee and Wastegate Actuator)
Maps available as part of this test:
- Stage1+Mishimoto 91 HWG *
- Stage1+Mishimoto 91 *
- Stage1+Mishimoto 93 HWG *
- Stage1+Mishimoto 93 *
- Stage1+Mishimoto Economy Mode **
- Stage1+Mishimoto Valet Mode **
* Boost Target is 19psi peak, +/- 1.5psi.
** Boost Target is Wastegate Boost Pressure only.
- Stage2+Mishimoto 91 HWG ***
- Stage2+Mishimoto 91 ***
- Stage2+Mishimoto 93 HWG ***
- Stage2+Mishimoto 93 ***
- Stage2+Mishimoto Economy Mode ****
- Stage2+Mishimoto Valet Mode ****
*** Boost Target is 20.5psi peak, +/- 1.5psi.
**** Boost Target is Wastegate Boost Pressure only.
For those of you looking for an upgraded J-Pipe for 2015 WRX 6MT, COBB Tuning's unit has now been released: http://www.cobbtuning.com/Subaru-201...e-p/541203.htm
For those of you looking for an upgraded catback exhaust for the 2015 WRX 6MT/CVT, COBB Tuning's unit has now been released: http://www.cobbtuning.com/products/exhaust/subaru-2015-wrx-sti-sedan-ss-3-cat-back-exhaust
NOTE!!!: Due to the boost spiking that is common on the 2015 WRX (that becomes even worse with exhaust upgrades), our Stage2+Mishimoto maps require the deletion of the second restrictor pill. If this is not done, underboosting will result. The hose and pill in question are shown below. The entire hose can be replaced with a new section of 6mm or 1/4" silicone vacuum hose (clamp each end securely!) and the factory hose can be set aside. Alternately, you may remove the pill from the OEM hose, set the pill aside and reinstall the hose.
We appreciate your feedback and thank you for your support!
If you'd like to send us a log to review, please reset the log list to default to make sure we have the appropriate monitors. Please also include your car's year and mileage, your exact mods, the name of the map being used and the general conditions under which the log was collected.
Online services like Box, Google Drive, Dropbox, etc. can be used to host files if you need a good way to share datalogs - please just be sure to mark the file as available for public download!
Many thanks for your support and we are looking forward to your feedback!
COBB Tuning Subaru Expert Group: firstname.lastname@example.org